Home / HOWTO / together

How To Sew Jeans Back Together

May 23, 2021

You can also cut off the seam and join together as a normal seam. Merge the front half with the back half 5.

Alter Jeans by adding darts. Tutorial. SO easy, just have

And then press both seam allowances towards the jeans front.

How to sew jeans back together. Sew the back half together 4. Sew front pockets onto front pieces 3. To create the front pockets on jeans you’ll need the following pieces.

Stitch using a 5/8 seam allowance and then trim the jeans back seam allowance to a consistant 1/4. If you want some adjustment, margin, loosing, tightening, then mark accordingly. Place a jean back and jean front with wrong sides together and pin along the length of the inseam.

Sew the seat together with a single straight stitch next to the pins. Continue this pattern until the entire rip closes. Press seam allowances up toward the yoke.

Double check all the markings and all the pieces that you have placed. Line up the center back, and make sure the yoke seam and notches match up. Sew that side using a navy or blue thread.

Place your denim pattern pieces (ripped off pieces of old jeans) and mark around it. Pin the seat together by turning the right sides (the outside of the jeans) to face each other. Place the two back pieces on top of each other, right sides together.

The waistband, belt loops and button hole 6. I sew all the jeans details (back pockets, front pockets, yoke), sew the inseams and then stop. Then finish the raw edge with your preferred method.

6 do embroidery after patching from the back. Sew the folded sides of the back pockets and stitch them to the jeans. Pin along the chalk lines you made earlier.

Topstitch about 3mm (1/8”) from the edge of the seam. I then proceed with the next stage of the sewing process (side seams) with a long basting stitch and the fabric with wrong sides together: Take a back leg and a back yoke piece.

The final stage is sewing the front and back together. Push the needle through the fabric right next to the knot. If it's available, try to use thread that's the same as the seam as the rest of the jeans.

Using regular thread, sew 5/8” from the edge. First, turn your jeans inside out; You start with the inseam, followed by the outseam, then the belt loops, the waistband and the very last step is adding the trim.

Repeat for the other side and stitch the two together. To learn more about jeans making, check out my book sewing jeans: I pressed them and used my clapper to reduce the thickness.

Use the threaded needle to sew stitches into the denim around the edge of the hole, taking care to sew 0.5 inches away from the edge so it holds together. From the right side of the fabric, topstitch along the center back on the left side of the seam, 1/6” from the seam. That way, when you sew, the new seams won't be as visible.

Pin it to the top of the side of the bag and sew into place. Pull the string all the way through. Straight stitch across this edge before you fold the other sides in by 1 ⁄ 4 inch (0.64 cm).

This involves making hand embroidery stitches over the patching. Take both of the back pocket pieces and fold the top edge down 2 times to hide the raw edge. Take a sewing needle and thread, and stitch back and forth until the rip is mended.

Finish the seam allowances together using a serger, mock overlock or zigzag stitch. Keep the patch fabric on the back of the hole and instead of doing any other stitches you can do embroidery stitches over the patch. Open the zipper and pin the other side.

Press the seam allowance toward the left side (as if you are wearing the jeans). Turn the back right side out and you have a boxed bottom for your bag. Sew one piece at one time.

The inseams are also sewn with a flat fell seam. Now back to topstitching thread. The assembly of a pair of jeans is very different from the usual way of sewing together the legs of a pair of pants.

Hold the edges together and sew with a simple zigzag stitch. To sew a hole in your jeans, start by trimming away the frayed edges. These stitches will attach the patch as well as make a decorative element on your jeans.

Sew the seat of the jeans back together with a single straight stitch. Try to make the stitches as close as possible. Pin one side of the zipper just inside the waistband.

If the hole is a split seam, then you should be able to sew the seam back together with strong thread. Join the back seams together to form a tube. A narrow split seam is much easier to sew up than a large, proper hole in the fabric.

Construct fly and attached both front pieces together 2. Sew the back and front inside legs together. Sew the front and back outside leg seams together.

Press the seam towards the left leg. However, the result will look really professional and be very sturdy, the only downside is that it’s nearly impossible to fit the jeans as you sew, so make sure they fit properly before you embark on this adventure. Thirdly, for the back of the jeans, you need to sew the yoke, then attach the back pockets, and then the back rise.

The bottom hem is used as the top edge of the bag. Denim is not only the choice wear of the masses; You could do a second line of topstitching 5mm above the first.

Before you sew up the hole, consider the size and raggedness of the rip, along with the type of fabric in question. Pocket lining pocket shields to place on the lining and a coin pocket that you’ll place on the right shield btw if your pattern lacks these pieces you can download the pattern templates i’m using in the video for free. Pin the patch into place before you sew or iron it on, ensuring the edges are flat against the fabric.

Then stitch the back crotch seam from the back waist through to the front crotch and up to the front waist. I also whacked them several times with my hammer. Iron the pockets flat and position them on the back of the jeans so the right sides.

Cut the pieces and pin them together. Pin and sew the seam with a 1cm (3/8”) seam allowance.

Easy Patterns for Beginning Sewers Pants Sewing